First of all, the conveying pipe of the concrete conveying pump needs to be piped according to the characteristics of the project and the construction site and the concrete pouring scheme. Minimize the use of bends and hoses. The laying of the conveying pipe should follow safe construction, which is convenient for cleaning the pipeline, troubleshooting and repair in principle.

The first is to load the material, get the material into the mixing tank, the mixing tank is driven by the motor to operate, and the mixed concrete is poured into the material bucket. The material in the hopper must enter the conveying cylinder. The conveying system is powered by the hydraulic system. The conveying cylinder is pushed through the oil cylinder, and the concrete is sucked and sent one by one. Concrete mixing tractor is composed of concrete mixing and pumping professional equipment.

In the hot summer, the outdoor temperature on the construction site often exceeds 40 degrees. The long-term construction will cause the engine of the pump truck to heat up and the temperature of the hydraulic oil will rise, and the hot heat will further exacerbate the temperature of the engine and the hydraulic oil. So, what measures should we take to maintain the pump truck and its engine in the hot summer?

The small concrete pumping pressure value has two values of high pressure and low pressure. When the main hydraulic cylinder is driven without a rod cavity, the corresponding outlet pressure is high pressure; when the small concrete pump main hydraulic cylinder is driven by a rod cavity, the corresponding outlet pressure is low pressure.

In the current process of dike construction, the workload of long-distance earth adjustment operations is increasing. Therefore, many people think that the efficiency of the underground wheel loader scraper is low, and the scraper is useless. What role does the scraper have in the actual project?

Skilled operation of the wheel loader for loading and unloading activities can not only clarify the various mechanical functions, but more importantly, it is necessary to skillfully operate the machinery and rely on experience or use specifications to reduce the loss of equipment during the loading and unloading process. The relevant operation instructions are as follows:

The use efficiency and service life of the mining underground wheel loader are closely related to the management method of the using enterprise. Once neglected management will lead to an increase in the abnormal loss of equipment, resulting in an increase in the incidence of failure and even burying hidden safety hazards. So, what are the undesirable status quo in the use of current mining loaders?

The use of concrete delivery pumps has been used in more and more constructions, especially in the construction of new countryside. It is popular because of its small footprint, flexibility and efficiency. So how to buy cost-effective concrete pump?

In addition to completing daily tasks, concrete pump trucks should also have the habit of maintaining on time. When the pump truck is performing concrete pouring operations, if the repair and maintenance are not in place, it will cause hidden safety hazards.

When the inner wall of the pump cylinder of the concrete pump truck is damaged, it should be taken out for repair immediately, or it should be turned around. In order to facilitate maintenance and replacement of the concrete cylinder, we can set a movable door cover at the bottom of the concrete hopper. The opening and closing of this movable door cover can be completed by the movement of the oil cylinder. At the same time, the concrete cylinder body can also be pulled out from this opening.

There are some wearing parts of the concrete delivery pump that need to be regularly inspected for wear to ensure that the equipment can be used and operated better. This article will introduce to you which wear parts of the concrete pump need to be checked for wear:

The self-loading concrete mixer with automatic lubrication system can effectively reduce vehicle wear and fuel consumption! The electronic industry, which has its own precision, says that strictly controlling the proportion of ingredients, you can learn to drive in 2 to 3 hours, minimizing the threshold for workers to operate.

Our self-developed self-loading mixer truck can be completed in 12 minutes from feeding to discharging! The electronic industry with precision claims that the proportion of ingredients is strictly controlled, the mixer truck is anti-rolling, and the anti-falling object is suitable for operation in any venue. The mixing bucket can rotate 270 degrees and can discharge at a maximum position of 3.1 meters around the vehicle

The self-loading mixer is a concrete mixer that can load concrete materials such as stones, yellow sand, cement, water into the mixing tank. The automatic loading mixer is generally a small mixer, with a mixing volume of 2 to 6 cubic meters The automatic loading mixer can automatically load. The vehicle itself has a bucket with the same function as the loader, which can be loaded with concrete raw materials.

The unsuitable performance is firstly that the slump of fresh concrete is small and the expansion is small, but the amount of water reducing agent is already quite large at this time. The popular saying is "unopenable"; secondly, the slump loss is large, Sometimes there is even false setting, that is, the cement slurry is very thin at the beginning of the mixing, but it quickly sticks and dries, and the workability of the concrete after the machine is very poor;

The third step of the adaptability test is to find out the saturation blending value of the superplasticizer used for this cement. If two or more superplasticizers are mixed, the cement paste is passed through the total amount of the mixture. Test to find the saturation dosage point. The closer the amount of superplasticizer is to the saturated content of the cement, the easier it is to obtain good adaptability.

Concrete pumps are very common in the current construction. With the high-efficiency construction effect, they are very popular with customers. This article mainly analyzes the operation points of concrete pumps.

1. Different nature: EFI vehicles are equipped with electronically controlled fuel injection systems. It is short for electronically controlled gasoline injection engine. The concrete pump truck is a machine that continuously transports concrete along the pipeline using pressure, and is composed of a pump body and a delivery pipe.

1. The latest composite three-generation delivery pipe of the pump truck, the inner layer is high-strength and wear-resistant, the life of the straight pipe is up to 50,000 square meters, and the life of the bent pipe is up to 20,000 square meters.
2. The service life of the concrete piston made with special reinforcement materials and wear-resistant special answer technology is up to 30,000 square meters

The safe operation of the trailer mobile spider concrete placing boom machine mainly includes the following points:
1. The end pouring hose must be fastened with a safety rope. It is forbidden to use the end hose with a length of more than 3 meters to cast. The hose must not be inserted into the poured concrete and work strictly in accordance with the scope of the distributor.

Front end wheel loader is a kind of earthwork construction machinery widely used in highway, railway, construction, hydropower, port, mine and other construction projects. It is mainly used for shoveling bulk materials such as soil, sand, lime, coal, etc. , Hard soil, etc. for light shoveling. Replacing different auxiliary working devices can also carry out bulldozing, lifting and other materials such as wood loading and unloading operations.

On February 26, the Ministry of Housing and Urban-Rural Development issued the "Notice on Strengthening the Orderly Prevention and Control of New Coronary Pneumonia Epidemic Situation and Promoting Enterprise Resumption and Work", emphasizing the need to strengthen the prevention and control of outbreaks in the field of housing construction and municipal infrastructure engineering, and orderly promoting enterprise development Resume work.

As a downstream industry of the building materials industry, the construction industry's situation and changes are closely affecting the development of the building materials industry. The construction industry is a labor-intensive industry. Because the employees are mainly construction workers, the industry is greatly affected by the epidemic situation, and it is difficult to resume work, which directly affects the supply of upstream building materials.

Ou Hong, director of the Investment Department of the National Development and Reform Commission, said in Beijing on the 21st that as of March 20, the rate of resumption of key national projects had reached 89.1%. On March 21, Ou Hong, director of the Investment Division of the National Development and Reform Commission, said in Beijing that as of March 20, the national key project recovery rate had reached 89.1%.

It is often encountered that the concrete transmission pump gearbox is covered, and some harm will occur. Today, the editor will take you to see what are the common hazards of concrete pump gearboxes covered?

According to the various data provided by the concrete mixing station, I summarized some experiences and lessons in the application of pumping commercial concrete to block pumps and pipes, and hope to help you concrete friends. The characteristics of pumped concrete are uniform material quality, stable quality, and fast feed speed. It can continuously complete vertical and horizontal transportation at one time, with high production efficiency and labor saving. Because the concrete delivery pump

Machine-made sandstone powder (referred to as powder below 75μm), reaching 3312%. In order to meet the particle grading requirements, the crushed stone plant will wash the machine-made sand with water, and the powder will be washed away by water to make the fine particles 01315mm sieve pass the sieve residual value 5%. At first, we did not pay enough attention to this situation. The average particle size of the sand increased by 2%, but the pumpability

At present, concrete pumps have been widely used in the construction of concrete projects. By adopting the concrete delivery method, the construction party can not only reduce costs, but also save construction time and standardize the construction site. However, some problems will inevitably occur during the use process, such as the flow interruption during the pumping process, so why does the concrete delivery pump have a flow interruption? What harm will it cause?

From the long winter twelfth lunar month to decisively press the "pause button" for the prevention and control of the spread of the new crown epidemic, to the early spring of February to grasp the epidemic prevention and control and the economic development and start the "fast forward button" to resume production in time, concrete and cement All enterprises and employees in the product industry have experienced this difficult and unforgettable process.

High-tech projects are the focus of local governments to support resumption of work. Since February, more than 50 production bases of Jianhua Building Materials Group have resumed production and resumed production. On the premise of doing a good job in epidemic prevention and control, each subsidiary accelerated production and guaranteed transportation, helped the major projects in various regions to resume work smoothly, and recaptured the delayed construction period .

What is hydraulic concrete? In order to achieve the purpose of flood control, irrigation, power generation, water supply, shipping, etc., it is usually necessary to build different types of buildings for water blocking, flood discharge, water delivery, sand discharge, etc. These buildings are called hydraulic structures.

When the average day and night temperature is lower than 5 ℃ or the low temperature is lower than -3 ℃, it should be treated as winter construction. When the ambient temperature is lower than 5 ℃, it is forbidden to sprinkle the concrete surface for curing. At this time, the curing liquid can be sprayed on the concrete surface, and appropriate heat preservation measures should be taken.

Saintyol DAWIN 2.0 Cubic Meter Self Loading Concrete Mixer Truck Nice Performance in Reunion Island France
Self loading Concrete Mixer Truck
Loader + Mixing truck + Transport truck = 1 Self loading Concrete Mixer Truck
1.Concrete mixer truck with automatic feed and water supply. The latest technology saves time and effort.
2.The mixer truck with full hydraulic torque converter.270°Rotary discharge.
3.Steel wire tyre,Vibrator and camera(Real-time attention Vision blind area).

Concrete refers to a general term for engineering composite materials in which aggregates are cemented together by cementitious materials, and is widely used in civil engineering. Because it consists of solid phase, liquid phase, and gas phase, some bubbles will inevitably be produced after the concrete is poured. But the existence of these bubbles will not only affect the appearance of the project, but more importantly, it will have some hidden risks.

For the treatment measures of concrete bubbles, select the appropriate vibrating equipment, and determine the appropriate vibrating time, vibrating radius and frequency. At the same time, vibrate according to the method of "fast insertion, slow pumping, up and down drawing", the vibrating rod should be straight up Quickly insert and pull slowly, no leakage is allowed. When vibrating, it should twitch up and down.

Concrete slump mainly refers to the plasticizing performance and pump ability of concrete. The factors that affect the concrete slump mainly include gradation change, water content, weighing deviation of the scale, and the amount of admixture, which are easily overlooked. Cement temperature, etc. Slump refers to the workability of concrete, specifically to ensure the normal progress of construction, including the water retention, fluidity and cohesion of concrete.

(1) When the concrete strength level is less than C50, the slump should be less than 180 mm, and when the strength level is greater than C50, the slump should be greater than 180 mm; (2) When the specified concrete slump is less than 40 mm, the allowable deviation is ±10 Mm; when the specified concrete slump is 50~90 mm, the allowable deviation is ±20 mm; when the specified concrete slump is greater than 100 mm, the allowable deviation is ±30 mm;

The horizontal cement tank is a new type of cement silo designed by our factory to be matched with the mobile batching plant. This cement silo adopts a slow-pressure structure, which can effectively place the cement arching phenomenon, and at the same time cooperate with a special flow-assisting device to achieve a uniform cement speed. Material is not compacted during long-term storage, hidden dust collector to ensure that there is no dust.

1. The operating lever is convenient for operation, and the touch screen adds water quantitatively.

2. The operation is sensitive and convenient, and the quantitative addition of water on the touch screen makes the stirring more uniform and more in line with the specifications.

The quality of the tunnel depends on the quality of the process. The quality of the process depends on the quality of the excavation, initial support and drainage and drainage, etc. The better control of the initial support and drainage and drainage can strengthen supervision, so the focus is on the quality of the excavation, which depends on the quality of the excavation The quality of drilling and blasting means that in theory, the quality of the initial support without over-excavation