The following inspection work is very important before concrete pump operation
sourceSaintyol DAWIN News Center
publisherJenny
time2021/03/23
- 1. Check that the bolts of each part of the concrete pump should be tightened, the pipe joints should be tight and sealed, the protective device should be complete and reliable, and the tires should be wedge tight.
1. Check that the bolts of each part of the concrete pump should be tightened, the pipe joints should be tight and sealed, the protective device should be complete and reliable, and the tires should be wedge tight.
2. All control switches should be placed in the neutral position (or cut-off position).
3. Check if the hydraulic oil tank of the concrete pump is insufficient, the same type of hydraulic oil should be added. Check that the hydraulic system should be normal and without leakage.
4. Check whether the power supply, water source and safety devices of the concrete pump have been correctly connected according to the original factory instructions.
5. Check the cooling water surface of the piston rod cooling and lubricating seal chamber. If the water is insufficient, fill it up; if the water is not clean, replace it, and check whether the commercial concrete piston is damaged.
6. Add lubricating oil (grease) to each lubricating point, and each lubricating point of each shift must be lubricated once.
7. There should be no debris in the mixing hopper, and the upper protective grid should be tightly covered.
8. Check the degree of wear and tear of the concrete pumping pipeline. The wall thickness of the pipeline should not be less than 3mm. Pipe joints, sealing rings and elbows should be replaced regularly. When the weather is hot, use wet sacks, wet straw bales, etc. to cover the pipeline.
9. Prepare the cleaning tube, cleaning supplies, ball catcher and related devices. Before operation, the pipeline must be lubricated with cement mortar prepared in accordance with the regulations. Irrelevant employees must leave the pipeline.
Saintyol DAWIN Machinery Co., Ltd. is an enterprise specializing in the development of large-scale construction engineering machinery and equipment integrating scientific research, production, sales and after-sales service. The company's main products are (D) XBS series fine stone concrete pump, (D) HBX series small aggregate fine stone concrete pump, JBT series mixing trailer pump, SPJ series wet spray machine, CSP series cement foaming machine, shotcrete machine Such as various concrete conveying equipment.
Among them, (D) XBS series fine stone concrete pump is a mortar conveying equipment specially developed for the characteristics of floor heating construction. It is suitable for large-area and high-efficiency construction of fine stone concrete filling layer or mortar filling layer in floor heating engineering. It is also suitable for the transportation of fine stone concrete in various engineering constructions, the transportation of refractory and thermal insulation materials, the transportation of green soil in the construction of ecological environment, and the pressure grouting of various foundation piles.
